Welcome to leathershoetech.com!
Categories
Welcome to leathershoetech.com!
$4.5-$5.9
Customization:
Payments:
Guangzhou Jingyi Silicone Material Co., Ltd.
Quick Details
Packaging & Delivery
| Quantity(Prices) |
| Est.Time(days) |
Silicone for molding candle wax products liquid silicone rubber make molds
Features
1. RTV Silicone rubber.
2. Low viscosity, sound fluidity.
3. Large adjustment range of hardness.
4. Low linear shrinkage rate.
Application
1. JYR-1230 For Clay/ plaster cement mould
2. JYR-1950 For low melting alloys and PVC mould
3. JYR-401 For sample mould
4. JYR-310 For Aluminum shoes mold
5. JYR-9210 For candle mould
6. JYR-514 For Transfer printing
7. JYR-520 For low deformability of mould
Type Item | JYR-1230 | JYR-1950 | JYR-401 | JYR-310 | JYR-9210 | JYR-514 | JYR-5585 | |
Before curing | Appearance | Light yellow or white viscous liquid | ||||||
Appearance(Curing-agent) | Colorless or light yellow liquid | |||||||
Viscosity/ mPa.s | 26000 | 17000 | 30000 | 10000 | 20000 | 20000 | 60000 | |
Operating Time | Surface curing time /min | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
Demoulding Time /min | 35 | 35 | 35 | 35 | 35 | 35 | 35 | |
After curing | Hardness/Shore A | 35 | 55 | 26 | 15 | 11 | 25 | 28 |
Tensile Strength/MPa | 3.0 | 4.5 | 2.5 | 2.1 | 3.5 | 2.0 | 4.0 | |
Elongation% | 300 | 180 | 380 | 600 | 700 | 250 | 600 | |
Tear-Resistance/ kN·m-1 | 6 | 6 | 17 | 18 | 17 | 4.0 | 25 | |
Linear Shrinkage rate /% | 0.2 | 0.2 | 0.3 | 0.3 | 0.3 | 0.3 | 0.15 | |
Density/ g.cm-3 | 1.30 | 1.36 | 1.34 | 1.15 | 1.15 | 1.3 | 1.19 | |
Characteristics and application field | For Clay /plaster cement mould | For low melting alloys and pvc mould | For Sample mould | For shoes mould | For candle mould | For Transfer Printing | Low deform-ability of the mold | |
silicone rubber for candle molds:
For the further information, please feel free to contact us:
1.To add 2-4% curing agent based on the weight ratio and currently mix and use it. It has to use it up in a short time.
2.Stirring the mixed rubber material and put it into the vacuum box for 3-S minutes air extracting. The mold can be used after defoaming
3.The curing rate of this product is closely relevant to the temperature. The higher the temperature is, the greater the humidity is and the curing speed becomes faster. Users can choose the curing agent according to the weather condition,and adjust the amount of the curing agent so as to reach the appropriated curing rate.
Packing, Storage and Attentions:
1. In general, the liquid silicone rubber is packed in iron drum, 25KG/drum, and the curing agent is 1L/plastic bottle.
2. Sealed for the products, and store it in the cool place, avoid rand and sun exposure.
3. The storage period is half a year. If there is an increase in viscosity, stir it before using, the performance will be same. It can be used after re-tested when it exceed the storage period.
4. The product is non-dangerous. During the operation, try to prevent any possibility of eyes and skin contact with the curing agent. In case of touching it, wash the affected skin thoroughly by soap, flushing with clean running water immediately for 5minutes at least, and then consult the doctor if necessary.
FAQ
1. What’s silicone products you are making?
--liquid silicone, silicone rubber, silicone oil; Due to different silicone molds, our silicone has different viscosity, and cause different hardness, density to meet the requests from client.
2. Do you offer free sample to client?
--Yes, we can provide the sample for test.
3. How about the quality control in your factory?
--We have professional QC team to control the quality during production. Goods will be 100% inspected before shipment.
4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
5. How to get good silicone mould to use longer time?
--The best way is:
1, Please choose the right liquid silicone according to your products.
2, Don’t use any silicone oil in mold making, because it can make the silicone mould become too soft to use.
3, Silicone mould can be used longer after the whole silicone mould fully cured, so it’s better to wait 2 hours after mould finished.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
For the further information, please feel free to contact Rejane Huang:
>>>Click here to email us & send inquiry
OEM SERVICE: A RAGE OF DESIGNS AVAILABLE, CLIENTS' DESIGNS ARE WELCOME
>>>Other hot sale mold making liquid silicone rubber type,please click the pictures of below
Company video and photos
| Business Type | Manufacturer, Trading Company, Distributor/Wholesaler | Main Products | General Silicone Rubber for Molding,Silicone Rubber for Molding with High Burn Resistance,Addition High Temperature Silicone Rubber for Molding,Silicone Rubber for Vacuum Bag Mould,Food -grade Silicone |
| Total Employees | 51 - 100 People | Year Established | 2012 |
| Total Annual Revenue | US$2.5 Million - US$5 Million | ||
| Certifications | -- | Product Certifications | Certification for Transport of Goods |
| Trademarks | -- | Patents | -- |
