Welcome to leathershoetech.com!
Categories
Welcome to leathershoetech.com!
$10-$12
Customization:
Payments:
Guangzhou Jingyi Silicone Material Co., Ltd.
Quick Details
Packaging & Delivery
| Quantity(Prices) |
| Est.Time(days) |
Clothing labels, shoe logo making clear transparent RTV liquid silicone rubber
Type Item | JYS-1310 | JYS-1310H | JYS-1250 | JYS-1260 | ||
| Appearance |
| Transparent viscous liquid |
| ||
Before | Appearance |
| Colorless and Transparent viscous liquid | |||
(Curing agent) |
| |||||
curing | Viscosity / mPa.s | 30000 | 70000 | AlB | ||
| Viscosity (Curing agent)/ mPa.s | 60 | 2000 | 60000160000 | 90000/90000 | |
Operating Time | (25°C) I min | 6 | 120 | 20 | 20 | |
Mixing proportion /weight |
| 10: 1 | 1 : 1 | |||
| Hardness / Shore A | 40 | 42 | 22 | 21 | |
| Tensile Strength/ MPa | 4.5 | 5.0 | 3.0 | 4.0 | |
After | Elongation /% | 260 | 260 | 380 | 600 | |
curing | Tear-Resistance / kN·m-1 | 14 | 15 | 8.0 | 15 | |
| Linear Shrinkage rate / % | 0.1 | 0.1 | 0.1 | 0.1 | |
| Density/ g.cm-3 | 1.10 | 1.10 | 1.12 | 1.12 | |
1. Mixture: Mix up the rubber and the curing agent in the weight proportion of 10: 1 or 1: 1. It can be manually stirred or mixed by equipment.
2. Defoaming: The mixed rubber should be deaerated before cast pouring. It is finished (in about 10 minutes) until there is no bubble on the surface. If a small amount of rubber is used, operate it in the vacuum dryer.
3. Molding: the mixed rubber after bubble defoamation should adopt the method of dispensing or
fractioning. Put the mixed rubber in to the mould and heat it to mold.
Package, Storage and Attention:
1. This kind of rubber is packed in 25KG/iron drum and curing agent in 1L /plastic bottle.
2.This product should be sealed and placed in cool place so as to prevent rain and sunlight exposure.
3.The storage period of this product is half a year. If it occurs to be more viscous, stir it and reuse it with the same property. It can be reused after reinspection when it exceed the storage period.
4.The surface of the replicative mold product such as glass, ceramics, resin, wooden ware or some product with coating should be smearred with surfactants (such as detergent, shampoo, soapsuds) . Perfuse or brush the silicone rubber after the water evaporates, which facilitates demoulding.
5.This product is non-dangerous .During the operation, try to prevent any possibility of eyes and skin contact with the curing agent. Wash affected skin thoroughly with soap and water in case of touching it. Flush with clean running water immediately at least for 15 minutes, and consult a doctor if necessary.
For the further information, please feel free to contact Chloe Zhou:
>>>Other hot sale mold making liquid silicone rubber type
Company video and photos
| Business Type | Manufacturer, Trading Company, Distributor/Wholesaler | Main Products | General Silicone Rubber for Molding,Silicone Rubber for Molding with High Burn Resistance,Addition High Temperature Silicone Rubber for Molding,Silicone Rubber for Vacuum Bag Mould,Food -grade Silicone |
| Total Employees | 51 - 100 People | Year Established | 2012 |
| Total Annual Revenue | US$2.5 Million - US$5 Million | ||
| Certifications | -- | Product Certifications | Certification for Transport of Goods |
| Trademarks | -- | Patents | -- |
