shoe toe lasting machine

LB-737A toe lasting machine

1.  all around forming band and specially tracked wipers ensure uppers more evenly and closely attached to lasts after lasting.no protrusion will happen so the surface becomes more beautiful,and the quality is upgraded.

2.  the mechanism of toe part pressing pad adopts adjustable 2 stage pressure.the design of compound cylinder helps shoes reach the best quality on the proceedings of wiper lasting and final pressing and ensure the smoothness of shoe lasting feather edge.there are two pressing methods for the first pressure of toe pad pressing mechanism.the consisten pressing function makes the lasting process smoothly.the position fixed function avoids the over lasting and pulling down of toe uppers when using the soft leather.

3.  each set of pincers can be individually adjustd\ed to their corresponding positionsand be functioned with automatic balancing besides,an automatic down pulling stroke can be selected and controlled according to the tension of the uppers.

4. the 9 independent pincers can be individually adjusted to cope with  the lasting of any shape of shoe toes.the automatic balance device and the theory of automatic descending on wipers advancing are the very key points for upgrading the quality and raising the production capacity.

5. the wipers are functioned with inching movement and speed adjustment,which makes the whole adjustment of lasting control more convenient.

6.  The machine is equipped with cross projector assembly,which is convenient for correcting toe lasting and helps new comers to easily operate the machine

7.  The last support plate is functioned with two stage rising mechanism which can prevent the lasts slip off in conjunction with the action of heel supporter.

8.  The rapid installing and releasing structure for pincers can finish the whole process within 30 seconds.

9.  The mid pincers can be adjusted 15.Both to the right and the left according to the shape of toes.

10. The height of the last support plate is remotely controlled.there is a numerical instrusction provided for referrence which makes the operation easier and more efficient.

11. The lasting adjustment works without any tool.it is indicated on the rullers for graduation and position.

12. The pressure and speed for each mechanism are adjusted and the pressure gage is also installed at the outside of the machine which makes the operation and adjustment more conveniently.

13. The rising speed of last support plate is two stage automatically transferring which can upgrade the production efficiency for the easy broken uppers.

14. The newly designed forward and backward adjusting mechanism for last support plates can quickly adjust the corresponding position of last support plates and mid pincers according to the different size of shoes.

15.  Rotary pincers,the fifth pincers can rotate inward when the wipers move in and last the shoes.the rotary angle can be adjusted,which will help the upper at ball point more stretched and attached to the last.then,the shoes will be lasted and finished perfectly,

16.  Speedy adjustment of pincers fixed plate:the pincers fixed plate adopts the double tracking structure,it is indepenently adjusted on the right and the left.the rotary point of pincers fixed plate is located at the joint between the first and second pincer.the curve in between will not be changed when the groups of right and left pincers are adjusted,which will made the uppers more attached to the lasts.

Machinery dimension(L*W*H):1710*950*1950mm

Packing size(L*W*H):1760*1000*2160mm

Prodution ability:2000pairs /8Hr

N.W.:1100kgs

G.W.: Gross weight will be provided when delivery

Power:2HP

Heating:1000W

Oil pressure:50kg/cm²

Hydraulic oil:115liters

PICTURES: