1.
Computer control center is the machine circuit control unit, operation of it is carried out through function buttons displayed on touching screen
2. The swing structure is connected with the pressing rod seat, when machine is running, swing structure pull and push the seat correspondingly the pressing rod will rotate and change its position to make it convenient for taking out or putting in the shoe model.
3. Pressing operation buttons need to be pressed at the same time to make the machine work
4. Semi-circle rubber seat is made of premium oxhide and silicon, that is durable to use. Upper and down side are movable to fit with shoes of different size.
5. High quality pressure oil meter are introduced, pressure system Value is indicated clearly, which makes commissioning and repairing simple
6. Devices of Taiwan brands are introduced ,CML oil pump, motor, offer big horsepower with low noise.
Brief operating proc:
1.Power cable should be connected on socket meet ECC standards with magnetic switch of 380v.
2.Please fill 90-100 litters of 68# or 46# hydraulic oil into oil tank.
3.switch on main power, then turn on pump switch, then select mode, then adjust pressing time.
4.Put the shoe last in the large seat properly, then adjust relevant component properly.
5.To adjust distance between front and rear rod, adjusting distance between top and bottom part of the rear pressing head by screwing the rod.
6.Step the pedal switch or press the two green button at the same time to start the machine for pressing operation.