1.This Toe Lasting Machine is 9-pincers fully controlled by hydraulic.It can be adjusted according to the sharps of shoes.Different Middle pincers,squeezer and sweep blade can be selected to finish uppers.

2.There is a right-and-left structure of squeezer for this machine.We add a middle structure of squeezer to ensure uppers more evenly and closely attached tol asts after lasting.No protrusion will happen so the surface becomes more beautiful and the quality is upgraded.

3.The sweep blade have different sharps and functioned with inching movement and speed adjustment,which makes the whole adjustment of lasting control more convenient.

4.Each set of pincers can be adjusted to cope with the lasting of any shape of shoe toes.Tap the Manual switch to select any of pincer pull down or re-clamp the upper to have the best tension and attachment to the last.

5.Tap the down manual switch of the support plate,pull down the plate,change the pincers and take off the screw easily

6.The interior and exterior support,heel seat speed can be adjusted on operate plate.The pincer pressure,first and second pressure,the pressure of squeezer can be adjusted on the plate.There is a pressure meter equipped outside or the machine,the operation and adjustment will more convenient and easier

7.The shoe head's pressing can be easily adjusted by the screw
8.The pincers base plate adopts the double-tracking structure.Tap the switcn, the forward and backward pincers can be adjusted to right-and-left.

9.The machine is equipped cross proiector assembly,which is convenient for correcting the shoe head's and helps new comers to easily operate the machinie

10.Owing to the auxiliary sweep blade.the lasting can be prolonged to the middie of the shoes,which will finish the shoes perfectly.

II.WVith new design and equipped with well-knowing electronic,the whole macme looks smart,delicate and beautiful